NOVOSENSE combines MCU, analog, power, and drivers in application-specific automotive edge nodes

November 13, 2026

NOVOSENSE combines MCU, analog, power, and drivers in application-specific automotive edge nodes

Image: ChatGPT

As zonal architectures move computing toward central controllers, actuators, sensors, and lighting modules at the vehicle edge still need local intelligence. NOVOSENSE is addressing that requirement with NovoGenius®, a family of application-specific automotive processors that combines MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems. functions with analog, power, and driver circuitry around one target use case at a time.

The company frames the concept as MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems.+: a single IC1. integrated circuitIC is the common term for an integrated circuit.2. ion chromatographyAnalytical method that separates and identifies the components of a mixture. that can replace the usual mix of a general-purpose MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems., voltage regulator, transceiver, gate driver, and analog front end. In motor-control devices, an integrated automotive LDOlow-dropout regulatorA linear regulator with a small input-to-output voltage difference. runs from the 12 V battery, a LIN transceiver, ADC1. analog-to-digital converterCircuit that converts an analog input signal into digital values.2. automated data collectionSystem or method for collecting, storing, exchanging or analyzing data.3. automatic defect classificationMeasurement or inspection concept for tracking defects and process variations in manufacturing., MOSFET1. metal-oxide semiconductor field effect transistorVoltage-controlled field-effect transistor with an insulated gate, widely used in integrated circuits.2. metal-oxide-semiconductor field-effect transistorA common transistor type used here as the layout and technology reference. driver, and MOSFET1. metal-oxide semiconductor field effect transistorVoltage-controlled field-effect transistor with an insulated gate, widely used in integrated circuits.2. metal-oxide-semiconductor field-effect transistorA common transistor type used here as the layout and technology reference. bridge are integrated on-chip, and the same device can drive stepper, brushless DCdirect currentElectric current that flows in one direction., or brushed DCdirect currentElectric current that flows in one direction. motors. Apart from passive components, no additional board-level IC1. integrated circuitIC is the common term for an integrated circuit.2. ion chromatographyAnalytical method that separates and identifies the components of a mixture.s are needed.

That integration has a direct system-level effect. NOVOSENSE says a comparable design built from a general-purpose MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems. and discrete support parts uses roughly three times the PCBprinted circuit boardBoard that mechanically supports components and electrically interconnects them with copper traces. area. The smaller footprint can allow the controller board to be mounted inside the motor housing, turning the motor into a smart motor without an external ECU.

The same application-specific strategy extends to sensing. NSUC1800 integrates digital signal processing for park assist and low-speed maneuvering, and follows the physical and data link layers of DSI3 so it can communicate with existing DSI3 master devices. For automated parking, the diagnostics burden increases: each ultrasonic node must monitor itself and external components such as the capacitor in the transducer circuit, then warn or stop the function if a fault is detected.

Rain and light sensor devices in the NSUC183x family are offered at different integration levels, including a pin-compatible analog-front-end-only version and a two-die version that adds the MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems.. Beyond wiper control and headlamp activation, these modules now also measure ambient brightness for head-up display adjustment and separate solar load on the driver and front passenger sides so HVACheating, ventilating, and air conditioning can treat each zone differently.

Ambient lighting is becoming another high-integration node. NSUC1527 adds a CANController Area NetworkCAN is a widely used in-vehicle communication protocol. interface to support higher-bandwidth lighting effects synchronized with music, while the next generation of the NSUC1500 series is being designed for higher LEDlight-emitting diodeSemiconductor diode that emits light when current flows. drive current and better efficiency. The lighting devices also compensate brightness for temperature and aging by monitoring LEDlight-emitting diodeSemiconductor diode that emits light when current flows. forward voltage, and NOVOSENSE provides manufacturing tools for brightness and color calibration.

Across the portfolio, the company uses reusable IP1. image placement2. Internet protocolInterface or communications concept for transmitting data between devices and systems.3. Intellectual PropertyIP denotes licensable semiconductor design blocks or technology elements. blocks to shorten development time. The first-generation NovoGenius® motor driver took two and a half years to develop, while later generations were completed in 15 months once the building blocks had been converted into reusable IP1. image placement2. Internet protocolInterface or communications concept for transmitting data between devices and systems.3. Intellectual PropertyIP denotes licensable semiconductor design blocks or technology elements.. NOVOSENSE also says its turnkey motor-control software has reached ASPICE Capability Level 2 and follows a V-model development flow with testing at the unit, module, function, and system levels.

Looking further ahead, NOVOSENSE expects some stable applications to move from MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems.+ to MCU1. microprocessor control unit2. mobile calibration unit3. microcontrollerA microcontroller is a compact integrated circuit designed to execute embedded control tasks in electronic systems.-less control, with fixed digital logic replacing programmable control in selected cases. For now, however, the company sees application-specific integration as the practical way to reduce cost, board space, and external parts while keeping precise local control at the edge node.

Source: EE Times

More background: Fundamentals

← All posts